Dormer S9445.0 5982915 End Mill 5.00 mm
- Write a review
$39.59
Basic StandardDORMERCoatingTiAlNCoating property (CTP)1Connection diameter - inch (DCON MS)0.1969Connection diameter - millimeter (DCON MS)5Corner chamfer width - millimeter (CHW)0.13Cut lengthMediumCutting diameter - inch (DC)0.1969Cutting diameter - millimeter (DC)5Cutting diameter tolerance class (TCDC)h12Depth of cut maximum - inch (APMX)0.6299Depth of cut maximum - millimeter (APMX)16EDP number40256Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5982915Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS9445.0Overall length - inch (OAL)1.9685Overall length - millimeter (OAL)50Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankCylindrical shank DIN 6535 HB
Specifications
| Basic Standard | DORMER |
| Coating | TiAlN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.1969 |
| Connection diameter - millimeter (DCON MS) | 5 |
| Corner chamfer width - millimeter (CHW) | 0.13 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.1969 |
| Cutting diameter - millimeter (DC) | 5 |
| Cutting diameter tolerance class (TCDC) | h12 |
| Depth of cut maximum - inch (APMX) | 0.6299 |
| Depth of cut maximum - millimeter (APMX) | 16 |
| EDP number | 40256 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5982915 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S9445.0 |
| Overall length - inch (OAL) | 1.9685 |
| Overall length - millimeter (OAL) | 50 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Cylindrical shank DIN 6535 HB |
5982915
