Dormer S5218.0XR1.0 6706678 Corner Radius End Mill 8.00 mm x 1.0 mm
- Write a review
$110.46
Basic StandardDORMERCoatingTiSiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8Corner radius - inch (RE)0.0394Corner radius - millimeter (RE)1Cut lengthExtra shortCutting diameter - inch (DC)0.315Cutting diameter - millimeter (DC)8Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.3543Depth of cut maximum - millimeter (APMX)9EDP number46706678Flute count (NOF)4Flute helix angle (FHA)45MaterialHMMaterial applicationH - Hardened materialsMID number6706678Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.2913Neck diameter - millimeter (DN)7.4Ordering code ANSIS5218.0XR1.0Overall length - inch (OAL)2.5197Overall length - millimeter (OAL)64Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)-10ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)26
Specifications
| Basic Standard | DORMER |
| Coating | TiSiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| Corner radius - inch (RE) | 0.0394 |
| Corner radius - millimeter (RE) | 1 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.315 |
| Cutting diameter - millimeter (DC) | 8 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.3543 |
| Depth of cut maximum - millimeter (APMX) | 9 |
| EDP number | 46706678 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 45 |
| Material | HM |
| Material application | H - Hardened materials |
| MID number | 6706678 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.2913 |
| Neck diameter - millimeter (DN) | 7.4 |
| Ordering code ANSI | S5218.0XR1.0 |
| Overall length - inch (OAL) | 2.5197 |
| Overall length - millimeter (OAL) | 64 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | -10 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 26 |
6706678
