Dormer E52412-28NO2 5976366 UNF Machine Tap Straight Flute 3FL No.12 x 28
- Write a review
$23.68
Basic StandardISO 529Clamping Length - millimeter (LSC)7Clamping width - fractional inch (WSC)4.5Clamping width - inch0.1772CoatingBrightConnection diameter - inch (DCON MS)0.2205Connection diameter - millimeter (DCON MS)5.6Coolant supply property (CSP)5.486EDP number152874Flute count (NOF)3Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5976366Ordering code ANSIE52412-28NO2Overall length - inch (OAL)2.4409Overall length - millimeter (OAL)62Premachined hole diameter - inch (PHD)0.185Premachined hole diameter - millimeter (PHD)4.7ShankCylindrical shank with SquareThread diameter - inch (TD)0.216Thread diameter - millimeter (TD)5.486Thread diameter size (TDZ)12Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.4724Threading length - millimeter (THL)12Threads per inch (TPI)28Usable length (ULDR)1.5Usable Length - inch (LU)0.8268Usable Length - millimeter (LU)21
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 7 |
| Clamping width - fractional inch (WSC) | 4.5 |
| Clamping width - inch | 0.1772 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.2205 |
| Connection diameter - millimeter (DCON MS) | 5.6 |
| Coolant supply property (CSP) | 5.486 |
| EDP number | 152874 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5976366 |
| Ordering code ANSI | E52412-28NO2 |
| Overall length - inch (OAL) | 2.4409 |
| Overall length - millimeter (OAL) | 62 |
| Premachined hole diameter - inch (PHD) | 0.185 |
| Premachined hole diameter - millimeter (PHD) | 4.7 |
| Shank | Cylindrical shank with Square |
| Thread diameter - inch (TD) | 0.216 |
| Thread diameter - millimeter (TD) | 5.486 |
| Thread diameter size (TDZ) | 12 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.4724 |
| Threading length - millimeter (THL) | 12 |
| Threads per inch (TPI) | 28 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 0.8268 |
| Usable Length - millimeter (LU) | 21 |
5976366
