Dormer E242M8X1.0 5975780 MF Machine Tap Straight Flute DIN 371 3FL M8 x 1.00 mm
- Write a review
$37.75
Basic StandardDIN 371Clamping Length - millimeter (LSC)9Clamping width - fractional inch (WSC)6.2Clamping width - inch0.2441CoatingBrightConnection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8EDP number165980Flute count (NOF)3Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)LeftMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5975780Ordering code ANSIE242M8X1.0Overall length - inch (OAL)3.5433Overall length - millimeter (OAL)90Premachined hole diameter - inch (PHD)0.2756Premachined hole diameter - millimeter (PHD)7ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter size (TDZ)8Thread form (THFT)MF - Metric fineThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.7087Threading length - millimeter (THL)18Usable length (ULDR)1.5Usable Length - inch (LU)1.378Usable Length - millimeter (LU)35
Specifications
| Basic Standard | DIN 371 |
| Clamping Length - millimeter (LSC) | 9 |
| Clamping width - fractional inch (WSC) | 6.2 |
| Clamping width - inch | 0.2441 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| EDP number | 165980 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Left |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5975780 |
| Ordering code ANSI | E242M8X1.0 |
| Overall length - inch (OAL) | 3.5433 |
| Overall length - millimeter (OAL) | 90 |
| Premachined hole diameter - inch (PHD) | 0.2756 |
| Premachined hole diameter - millimeter (PHD) | 7 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter size (TDZ) | 8 |
| Thread form (THFT) | MF - Metric fine |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.7087 |
| Threading length - millimeter (THL) | 18 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 1.378 |
| Usable Length - millimeter (LU) | 35 |
5975780