Pramet ADMX 160620SR-M:M6330 7601332 Milling Insert - Square Shoulder
- Write a review
$11.83
Coating0.012Coating process0.004Coating property (CTP)1Cooling effectMCorner radius - inch (RE)M6330Corner radius - millimeter (RE)PVDCutting edge length - inch (L)0.63Cutting edge length - millimeter (L)16Depth of cut maximum - inch (APMX)0.512Depth of cut maximum - millimeter (APMX)13Feed maximal - millimeter0.3Feed minimal - millimeter0.1Feed_MAX_IMP_NUM0.012Feed_MIN_IMP_NUM0.3Fixing hole diameter - inch (D1)0.177Fixing hole diameter - millimeter (D1)4.5Insert cutting diameter - millimeter (CDI)6.25Insert diameter - inch (INSD)0.392Insert diameter - millimeter (INSD)9.95Insert thickness - inch (S)2Major cutting edge angle (KRINS)0.079Wiper edge length - inch (BS)Slightly negative effect on tool life
Specifications
| Coating | 0.012 |
| Coating process | 0.004 |
| Coating property (CTP) | 1 |
| Cooling effect | M |
| Corner radius - inch (RE) | M6330 |
| Corner radius - millimeter (RE) | PVD |
| Cutting edge length - inch (L) | 0.63 |
| Cutting edge length - millimeter (L) | 16 |
| Depth of cut maximum - inch (APMX) | 0.512 |
| Depth of cut maximum - millimeter (APMX) | 13 |
| Feed maximal - millimeter | 0.3 |
| Feed minimal - millimeter | 0.1 |
| Feed_MAX_IMP_NUM | 0.012 |
| Feed_MIN_IMP_NUM | 0.3 |
| Fixing hole diameter - inch (D1) | 0.177 |
| Fixing hole diameter - millimeter (D1) | 4.5 |
| Insert cutting diameter - millimeter (CDI) | 6.25 |
| Insert diameter - inch (INSD) | 0.392 |
| Insert diameter - millimeter (INSD) | 9.95 |
| Insert thickness - inch (S) | 2 |
| Major cutting edge angle (KRINS) | 0.079 |
| Wiper edge length - inch (BS) | Slightly negative effect on tool life |
ADMX 160620SR-M:M6330
