Pramet 802D-0750-150-S100 6801095 Indexable Drill 2 x D
- Write a review
$422.60
Adjustment limit maximum - inch (ADJLX)0.014Adjustment limit minimum - inch (ADJLN)0.012Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1Connection diameter - millimeter (DCON MS)25.4Connection diameter tolerance machine side (TCDCONMS)h6Cooling (CSP)1Cutting diameter - inch (DC)0.75Cutting diameter - millimeter (DC)19.1Depth of cut maximum - inch (APMX)1.5Overall length - inch (OAL)4.728Overall length - millimeter (OAL)120Protruding length - inch (LPR)2.484ShankCylindrical Shank ISO 9766Shank length - inch (LS)2.244Usable length (ULDR)2Usable Length - inch (LU)1.677
Specifications
| Adjustment limit maximum - inch (ADJLX) | 0.014 |
| Adjustment limit minimum - inch (ADJLN) | 0.012 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1 |
| Connection diameter - millimeter (DCON MS) | 25.4 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cooling (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.75 |
| Cutting diameter - millimeter (DC) | 19.1 |
| Depth of cut maximum - inch (APMX) | 1.5 |
| Overall length - inch (OAL) | 4.728 |
| Overall length - millimeter (OAL) | 120 |
| Protruding length - inch (LPR) | 2.484 |
| Shank | Cylindrical Shank ISO 9766 |
| Shank length - inch (LS) | 2.244 |
| Usable length (ULDR) | 2 |
| Usable Length - inch (LU) | 1.677 |
6801095
