1700M12X1.75NO3 1012497 Hand Tap M12 x 1.75 mm
- Write a review
$15.17
Basic StandardANSIClamping width - inch0.275CoatingBrightConnection diameter - inch (DCON MS)0.367Connection diameter - millimeter (DCON MS)9.32Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSOverall length - fractional inch (OAL)3.3/8Overall length - inch (OAL)3.375ShankCylindrical shank with SquareThread diameter size (TDZ)M12Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0689Thread pitch - millimeter (TP)1.75Threading length - fractional inch (THL)1.21/32Tolerance limitD6Usable length (ULDR)1.5
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.275 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.367 |
| Connection diameter - millimeter (DCON MS) | 9.32 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Overall length - fractional inch (OAL) | 3.3/8 |
| Overall length - inch (OAL) | 3.375 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | M12 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0689 |
| Thread pitch - millimeter (TP) | 1.75 |
| Threading length - fractional inch (THL) | 1.21/32 |
| Tolerance limit | D6 |
| Usable length (ULDR) | 1.5 |
1700M12X1.75NO3
