Dormer C6095/8 7647932 Roughing End Mill 4FL 5/8 inch
- Write a review
$96.01
Basic StandardANSICoatingTiCNCoating property (CTP)1Connection diameter - fractional inch (DCON MS)5/8Connection diameter - inch (DCON MS)0.625Connection diameter - millimeter (DCON MS)15.88Cut lengthMediumCutting diameter - fractional inch (DC)5/8Cutting diameter - inch (DC)0.625Cutting diameter - millimeter (DC)15.88Cutting diameter tolerance class (TCDC)ANSI +.005/-.000Depth of cut maximum - fractional inch (APMX)1.5/8EDP number7647932Flute count (NOF)4Flute helix angle (FHA)30MaterialHSS-EMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number7647932Mill ProfileHRA - Fine Pitch Asymmetrical Rounded Profile ChipbreakerOrdering code ANSIC6095/8Overall length - fractional inch (OAL)3.3/4Overall length - inch (OAL)3.75Overall length - millimeter (OAL)95.25Radial rake angle (GAMF)15ShankCylindrical shank
Specifications
| Basic Standard | ANSI |
| Coating | TiCN |
| Coating property (CTP) | 1 |
| Connection diameter - fractional inch (DCON MS) | 5/8 |
| Connection diameter - inch (DCON MS) | 0.625 |
| Connection diameter - millimeter (DCON MS) | 15.88 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 5/8 |
| Cutting diameter - inch (DC) | 0.625 |
| Cutting diameter - millimeter (DC) | 15.88 |
| Cutting diameter tolerance class (TCDC) | ANSI +.005/-.000 |
| Depth of cut maximum - fractional inch (APMX) | 1.5/8 |
| EDP number | 7647932 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7647932 |
| Mill Profile | HRA - Fine Pitch Asymmetrical Rounded Profile Chipbreaker |
| Ordering code ANSI | C6095/8 |
| Overall length - fractional inch (OAL) | 3.3/4 |
| Overall length - inch (OAL) | 3.75 |
| Overall length - millimeter (OAL) | 95.25 |
| Radial rake angle (GAMF) | 15 |
| Shank | Cylindrical shank |
7647932
