Dormer A77711/64 5971055 Jobber Drill Split Point DIN 338 11/64 inch
- Write a review
$7.76
ApplicationAngleIcon_DICT_SELDrill point 135°Basic StandardDIN 338CoatingBronzeConnection (shank) descriptionCylindrical shankConnection diameter - inch (DCON MS)0.172Connection diameter - millimeter (DCON MS)4.37Cutting diameter - fractional inch (DC)11/64Cutting diameter - inch (DC)0.1719Cutting diameter - millimeter (DC)4.37Cutting diameter tolerance class (TCDC)h8Drill LengthJobberEDP number374641Hand (Cutting direction)RightLength chip flute - inch (LCF)1.8504Length chip flute - millimeter (LCF)47MaterialHSS-EMaterial applicationK - Cast iron, P - Steel and cast steel, S - High-temperature alloysMID number5971055Ordering code ANSIA77711/64Overall length - inch (OAL)3.1496Overall length - millimeter (OAL)80Point Angle (SIG)135Spiral formStandard SpiralSurface treatementSteam TemperedUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 135° |
| Basic Standard | DIN 338 |
| Coating | Bronze |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - inch (DCON MS) | 0.172 |
| Connection diameter - millimeter (DCON MS) | 4.37 |
| Cutting diameter - fractional inch (DC) | 11/64 |
| Cutting diameter - inch (DC) | 0.1719 |
| Cutting diameter - millimeter (DC) | 4.37 |
| Cutting diameter tolerance class (TCDC) | h8 |
| Drill Length | Jobber |
| EDP number | 374641 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 1.8504 |
| Length chip flute - millimeter (LCF) | 47 |
| Material | HSS-E |
| Material application | K - Cast iron, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5971055 |
| Ordering code ANSI | A77711/64 |
| Overall length - inch (OAL) | 3.1496 |
| Overall length - millimeter (OAL) | 80 |
| Point Angle (SIG) | 135 |
| Spiral form | Standard Spiral |
| Surface treatement | Steam Tempered |
| Usable length (ULDR) | 4 |
5971055
