Dormer A221N1 5969075 118° Centre Drill - 60° Short ANSI N1
- Write a review
$6.85
ApplicationAngleIcon_DICT_SELCenter drilling 60°Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)1/8Connection diameter - inch (DCON MS)0.125Connection diameter - millimeter (DCON MS)3.18Cutting diameter - fractional inch (DC)3/64Cutting diameter - inch (DC)0.0469Cutting diameter - millimeter (DC)1.19EDP number241868Hand (Cutting direction)RightInternal designation number1Length chip flute - fractional inch (LCF)3/64MaterialHSS-EMaterial applicationK - Cast iron, P - Steel and cast steelMID number5969075Ordering code ANSIA221N1Overall length - fractional inch (OAL)1.1/4Overall length - millimeter (OAL)31.75Point Angle (SIG)118ShankCylindrical shankStep included angle (STA)60Usable length (ULDR)1.5
Specifications
| ApplicationAngleIcon_DICT_SEL | Center drilling 60° |
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 1/8 |
| Connection diameter - inch (DCON MS) | 0.125 |
| Connection diameter - millimeter (DCON MS) | 3.18 |
| Cutting diameter - fractional inch (DC) | 3/64 |
| Cutting diameter - inch (DC) | 0.0469 |
| Cutting diameter - millimeter (DC) | 1.19 |
| EDP number | 241868 |
| Hand (Cutting direction) | Right |
| Internal designation number | 1 |
| Length chip flute - fractional inch (LCF) | 3/64 |
| Material | HSS-E |
| Material application | K - Cast iron, P - Steel and cast steel |
| MID number | 5969075 |
| Ordering code ANSI | A221N1 |
| Overall length - fractional inch (OAL) | 1.1/4 |
| Overall length - millimeter (OAL) | 31.75 |
| Point Angle (SIG) | 118 |
| Shank | Cylindrical shank |
| Step included angle (STA) | 60 |
| Usable length (ULDR) | 1.5 |
5969075
