Dormer C80011.0X5.0 5985489 T-slot Cutter 11.00 mm x 5.0 mm
- Write a review
$161.87
Basic StandardDIN 851CoatingBrightConnection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Cutting diameter - inch (DC)0.4331Cutting diameter - millimeter (DC)11Cutting diameter tolerance class (TCDC)d11Cutting width - inch (CW)0.1575Cutting width - millimeter (CW)4Depth of cut maximum - inch (APMX)0.1575Depth of cut maximum - millimeter (APMX)4EDP number74435Flute count (NOF)6Flute helix angle (FHA)15Head length - millimeter (LH)10.5MaterialHSS-EMID number5985489Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.1575Neck diameter - millimeter (DN)4Ordering code ANSIC80011.0X5.0Overall length - inch (OAL)2.1063Overall length - millimeter (OAL)53.5Peripheral effective cutting edge count (ZEFP)6Radial rake angle (GAMF)10ShankCylindrical shank DIN 1835 B / D
Specifications
| Basic Standard | DIN 851 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Cutting diameter - inch (DC) | 0.4331 |
| Cutting diameter - millimeter (DC) | 11 |
| Cutting diameter tolerance class (TCDC) | d11 |
| Cutting width - inch (CW) | 0.1575 |
| Cutting width - millimeter (CW) | 4 |
| Depth of cut maximum - inch (APMX) | 0.1575 |
| Depth of cut maximum - millimeter (APMX) | 4 |
| EDP number | 74435 |
| Flute count (NOF) | 6 |
| Flute helix angle (FHA) | 15 |
| Head length - millimeter (LH) | 10.5 |
| Material | HSS-E |
| MID number | 5985489 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.1575 |
| Neck diameter - millimeter (DN) | 4 |
| Ordering code ANSI | C80011.0X5.0 |
| Overall length - inch (OAL) | 2.1063 |
| Overall length - millimeter (OAL) | 53.5 |
| Peripheral effective cutting edge count (ZEFP) | 6 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank DIN 1835 B / D |
5985489