Dormer E02812-24 5974026 UNC Machine Tap Spiral Flute 45° No.12 x 24
- Write a review
$23.32
Basic StandardANSIClamping width - inch0.165CoatingSteam TemperedConnection diameter - inch (DCON MS)0.22Connection diameter - millimeter (DCON MS)5.59Coolant supply property (CSP)N16EDP number581698Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974026Ordering code ANSIE02812-24Overall length - fractional inch (OAL)2.3/8Overall length - inch (OAL)2.375Overall length - millimeter (OAL)0.22Premachined hole diameter - imperial (PHD)N16Premachined hole diameter - inch (PHD)0.1772Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)4.5Thread diameter size (TDZ)12Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.252Threads per inch (TPI)24Tolerance limitH3Usable length (ULDR)2.5Usable Length - inch (LU)0.8848
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.165 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 0.22 |
| Connection diameter - millimeter (DCON MS) | 5.59 |
| Coolant supply property (CSP) | N16 |
| EDP number | 581698 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974026 |
| Ordering code ANSI | E02812-24 |
| Overall length - fractional inch (OAL) | 2.3/8 |
| Overall length - inch (OAL) | 2.375 |
| Overall length - millimeter (OAL) | 0.22 |
| Premachined hole diameter - imperial (PHD) | N16 |
| Premachined hole diameter - inch (PHD) | 0.1772 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 4.5 |
| Thread diameter size (TDZ) | 12 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.252 |
| Threads per inch (TPI) | 24 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.8848 |
5974026
