Pramet CNMG 644-RM:T9335 6754877 Turning Insert - Negative
- Write a review
$22.74
ChipbreakerRMCoatingT9335Coating processMT-CVDCoating property (CTP)1Cooling effectVery positive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.063Corner radius - millimeter (RE)1.6Cutting edge length - inch (L)0.76Cutting edge length - millimeter (L)19.3Depth of cut maximum - inch (APMX)0.394Depth of cut maximum - millimeter (APMX)10Depth of cut minimum - inch (APMN)0.079Depth of cut minimum - millimeter (APMN)2Feed maximal - millimeter0.8Feed minimal - millimeter0.3Feed_MAX_IMP_NUM0.031Feed_MIN_IMP_NUM0.012Fixing hole diameter - inch (D1)0.313Fixing hole diameter - millimeter (D1)7.94Inscribed circle diameter - inch (IC)0.75Inscribed circle diameter - millimeter (IC)19.05Insert thickness - millimeter (S)6.35
Specifications
| Chipbreaker | RM |
| Coating | T9335 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.063 |
| Corner radius - millimeter (RE) | 1.6 |
| Cutting edge length - inch (L) | 0.76 |
| Cutting edge length - millimeter (L) | 19.3 |
| Depth of cut maximum - inch (APMX) | 0.394 |
| Depth of cut maximum - millimeter (APMX) | 10 |
| Depth of cut minimum - inch (APMN) | 0.079 |
| Depth of cut minimum - millimeter (APMN) | 2 |
| Feed maximal - millimeter | 0.8 |
| Feed minimal - millimeter | 0.3 |
| Feed_MAX_IMP_NUM | 0.031 |
| Feed_MIN_IMP_NUM | 0.012 |
| Fixing hole diameter - inch (D1) | 0.313 |
| Fixing hole diameter - millimeter (D1) | 7.94 |
| Inscribed circle diameter - inch (IC) | 0.75 |
| Inscribed circle diameter - millimeter (IC) | 19.05 |
| Insert thickness - millimeter (S) | 6.35 |
6754877
