Dormer J2159.5X1.75 6821311 Thread Mill Spiral Flute 27° Oil Feed M12 X 1.75 MM
- Write a review
$336.23
Basic StandardDORMERCoatingAlcrona ProCoating property (CTP)1Connection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Coolant exit style (CXSC)axial concentric exitCoolant supply property (CSP)1Cutting diameter - inch (DC)0.374Cutting diameter - millimeter (DC)9.5Depth of cut maximum - millimeter (APMX)26.25EDP number46821311Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)27Hand (Cutting direction)RightMaterialHMMID number6821311Ordering code ANSIJ2159.5X1.75Overall length - inch (OAL)3.1496Overall length - millimeter (OAL)80ShankCylindrical shank DIN 6535 HAThread diameter size (TDZ)M12Thread form (THFT)M - Metric coarseThread pitch - millimeter (TP)1.75Usable length (ULDR)2
Specifications
| Basic Standard | DORMER |
| Coating | Alcrona Pro |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Coolant exit style (CXSC) | axial concentric exit |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.374 |
| Cutting diameter - millimeter (DC) | 9.5 |
| Depth of cut maximum - millimeter (APMX) | 26.25 |
| EDP number | 46821311 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 27 |
| Hand (Cutting direction) | Right |
| Material | HM |
| MID number | 6821311 |
| Ordering code ANSI | J2159.5X1.75 |
| Overall length - inch (OAL) | 3.1496 |
| Overall length - millimeter (OAL) | 80 |
| Shank | Cylindrical shank DIN 6535 HA |
| Thread diameter size (TDZ) | M12 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - millimeter (TP) | 1.75 |
| Usable length (ULDR) | 2 |
6821311