Pramet SDGX 120508EN-FM:M8330 7447974 Milling Insert - Square Shoulder
- Write a review
$16.48
Coating0.006Coating process0.003Coating property (CTP)1Cooling effectFMCorner radius - inch (RE)M8330Corner radius - millimeter (RE)PVDCutting edge effective length - inch (LE)0.5Cutting edge effective length - millimeter (LE)12.7Cutting edge length - inch (L)0.5Cutting edge length - millimeter (L)12.7Depth of cut maximum - inch (APMX)0.472Depth of cut maximum - millimeter (APMX)12Feed maximal - millimeter0.15Feed minimal - millimeter0.07Feed_MAX_IMP_NUM0.039Feed_MIN_IMP_NUM1Inscribed circle diameter - inch (IC)0.5Inscribed circle diameter - millimeter (IC)12.7Insert cutting diameter - millimeter (CDI)5.56Insert length - inch (INSL)6.35Insert shape code (SC)S - squareInsert thickness - inch (S)0.8Insert thickness - millimeter (S)5.56Insert thickness total - inch (S1)0.25Insert thickness total - millimeter (S1)6.35Insert width - millimeter (W1)0.25Major cutting edge angle (KRINS)0.031Wiper edge length - inch (BS)Slightly negative effect on tool life
Specifications
| Coating | 0.006 |
| Coating process | 0.003 |
| Coating property (CTP) | 1 |
| Cooling effect | FM |
| Corner radius - inch (RE) | M8330 |
| Corner radius - millimeter (RE) | PVD |
| Cutting edge effective length - inch (LE) | 0.5 |
| Cutting edge effective length - millimeter (LE) | 12.7 |
| Cutting edge length - inch (L) | 0.5 |
| Cutting edge length - millimeter (L) | 12.7 |
| Depth of cut maximum - inch (APMX) | 0.472 |
| Depth of cut maximum - millimeter (APMX) | 12 |
| Feed maximal - millimeter | 0.15 |
| Feed minimal - millimeter | 0.07 |
| Feed_MAX_IMP_NUM | 0.039 |
| Feed_MIN_IMP_NUM | 1 |
| Inscribed circle diameter - inch (IC) | 0.5 |
| Inscribed circle diameter - millimeter (IC) | 12.7 |
| Insert cutting diameter - millimeter (CDI) | 5.56 |
| Insert length - inch (INSL) | 6.35 |
| Insert shape code (SC) | S - square |
| Insert thickness - inch (S) | 0.8 |
| Insert thickness - millimeter (S) | 5.56 |
| Insert thickness total - inch (S1) | 0.25 |
| Insert thickness total - millimeter (S1) | 6.35 |
| Insert width - millimeter (W1) | 0.25 |
| Major cutting edge angle (KRINS) | 0.031 |
| Wiper edge length - inch (BS) | Slightly negative effect on tool life |
7447974
