Dormer C6001/4 7647822 End Mill - Double End 2FL 1/4 inch
- Write a review
$26.44
Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)3/8Connection diameter - inch (DCON MS)0.375Connection diameter - millimeter (DCON MS)9.53Cut lengthMediumCutting diameter - fractional inch (DC)1/4Cutting diameter - inch (DC)0.25Cutting diameter - millimeter (DC)6.35Cutting diameter tolerance class (TCDC)ANSI +.0000/-.0015Depth of cut maximum - fractional inch (APMX)1/2EDP number7647822Flute count (NOF)2Flute helix angle (FHA)30MaterialHSSMaterial applicationP - Steel and cast steelMID number7647822Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC6001/4Overall length - fractional inch (OAL)3.3/8Overall length - inch (OAL)3.375Overall length - millimeter (OAL)85.73Radial rake angle (GAMF)8ShankCylindrical shank
Specifications
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 3/8 |
| Connection diameter - inch (DCON MS) | 0.375 |
| Connection diameter - millimeter (DCON MS) | 9.53 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 1/4 |
| Cutting diameter - inch (DC) | 0.25 |
| Cutting diameter - millimeter (DC) | 6.35 |
| Cutting diameter tolerance class (TCDC) | ANSI +.0000/-.0015 |
| Depth of cut maximum - fractional inch (APMX) | 1/2 |
| EDP number | 7647822 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 7647822 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C6001/4 |
| Overall length - fractional inch (OAL) | 3.3/8 |
| Overall length - inch (OAL) | 3.375 |
| Overall length - millimeter (OAL) | 85.73 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank |
7647822
