Pramet ODMT 050508SN-R:M9340 7342897 Milling Insert - Face
- Write a review
$12.38
ChipbreakerRCoatingM9340Coating processMT-CVDCoating property (CTP)1Cooling effectVery negative effect on tool life - cooling is not recommendedCorner radius - inch (RE)0.031Corner radius - millimeter (RE)0.8Depth of cut maximum - inch (APMX)0.118Depth of cut maximum - millimeter (APMX)3Depth of cut minimum - inch (APMN)0.012Depth of cut minimum - millimeter (APMN)0.3Feed maximal - millimeter0.34Feed minimal - millimeter0.23Feed_MAX_IMP_NUM0.013Feed_MIN_IMP_NUM0.009Fixing hole diameter - inch (D1)0.217Fixing hole diameter - millimeter (D1)5.5Inscribed circle diameter - inch (IC)0.5Inscribed circle diameter - millimeter (IC)12.7Insert shape code (SC)O - octagonalInsert thickness - inch (S)0.219Insert thickness - millimeter (S)5.56
Specifications
| Chipbreaker | R |
| Coating | M9340 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very negative effect on tool life - cooling is not recommended |
| Corner radius - inch (RE) | 0.031 |
| Corner radius - millimeter (RE) | 0.8 |
| Depth of cut maximum - inch (APMX) | 0.118 |
| Depth of cut maximum - millimeter (APMX) | 3 |
| Depth of cut minimum - inch (APMN) | 0.012 |
| Depth of cut minimum - millimeter (APMN) | 0.3 |
| Feed maximal - millimeter | 0.34 |
| Feed minimal - millimeter | 0.23 |
| Feed_MAX_IMP_NUM | 0.013 |
| Feed_MIN_IMP_NUM | 0.009 |
| Fixing hole diameter - inch (D1) | 0.217 |
| Fixing hole diameter - millimeter (D1) | 5.5 |
| Inscribed circle diameter - inch (IC) | 0.5 |
| Inscribed circle diameter - millimeter (IC) | 12.7 |
| Insert shape code (SC) | O - octagonal |
| Insert thickness - inch (S) | 0.219 |
| Insert thickness - millimeter (S) | 5.56 |
7342897
