Dormer E006M103FL 5974488 Machine Tap Spiral Point M10 x 1.50 mm
- Write a review
$25.89
Basic StandardANSIClamping width - inch0.286CoatingSteam TemperedConnection diameter - inch (DCON MS)0.381Connection diameter - millimeter (DCON MS)9.68EDP number580530Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974488Ordering code ANSIE006M103FLOverall length - fractional inch (OAL)2.15/16Overall length - inch (OAL)2.9375Overall length - millimeter (OAL)0.381Premachined hole diameter - imperial (PHD)QPremachined hole diameter - inch (PHD)0.3346Premachined hole diameter - millimeter (PHD)8.5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)QThread diameter size (TDZ)10Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - inch (THL)0.602Tolerance limitD6Usable length (ULDR)2.5Usable Length - inch (LU)1.2915
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.286 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 0.381 |
| Connection diameter - millimeter (DCON MS) | 9.68 |
| EDP number | 580530 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974488 |
| Ordering code ANSI | E006M103FL |
| Overall length - fractional inch (OAL) | 2.15/16 |
| Overall length - inch (OAL) | 2.9375 |
| Overall length - millimeter (OAL) | 0.381 |
| Premachined hole diameter - imperial (PHD) | Q |
| Premachined hole diameter - inch (PHD) | 0.3346 |
| Premachined hole diameter - millimeter (PHD) | 8.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | Q |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - inch (THL) | 0.602 |
| Tolerance limit | D6 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.2915 |
5974488
