Pramet LNMX 191940SN-TF:T9325 6798523 Turning Insert - Heavy Duty And Railway
- Write a review
$34.01
ChipbreakerTFCoatingT9325Coating processMT-CVDCoating property (CTP)1Cooling effectPositive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.157Corner radius - millimeter (RE)4Cutting edge length - inch (L)0.75Cutting edge length - millimeter (L)19.05Depth of cut maximum - inch (APMX)0.315Depth of cut maximum - millimeter (APMX)8Depth of cut minimum - inch (APMN)0.079Depth of cut minimum - millimeter (APMN)2Feed maximal - millimeter1.5Feed minimal - millimeter0.4Feed_MAX_IMP_NUM0.059Feed_MIN_IMP_NUM0.016Fixing hole diameter - inch (D1)0.25Fixing hole diameter - millimeter (D1)6.35Insert shape code (SC)L - rectangularInsert thickness - inch (S)0.75Insert thickness - millimeter (S)19.05Insert width - inch (W1)0.394Insert width - millimeter (W1)10
Specifications
| Chipbreaker | TF |
| Coating | T9325 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.157 |
| Corner radius - millimeter (RE) | 4 |
| Cutting edge length - inch (L) | 0.75 |
| Cutting edge length - millimeter (L) | 19.05 |
| Depth of cut maximum - inch (APMX) | 0.315 |
| Depth of cut maximum - millimeter (APMX) | 8 |
| Depth of cut minimum - inch (APMN) | 0.079 |
| Depth of cut minimum - millimeter (APMN) | 2 |
| Feed maximal - millimeter | 1.5 |
| Feed minimal - millimeter | 0.4 |
| Feed_MAX_IMP_NUM | 0.059 |
| Feed_MIN_IMP_NUM | 0.016 |
| Fixing hole diameter - inch (D1) | 0.25 |
| Fixing hole diameter - millimeter (D1) | 6.35 |
| Insert shape code (SC) | L - rectangular |
| Insert thickness - inch (S) | 0.75 |
| Insert thickness - millimeter (S) | 19.05 |
| Insert width - inch (W1) | 0.394 |
| Insert width - millimeter (W1) | 10 |
6798523
