Dormer C6001/2 7647829 End Mill - Double End 2FL 1/2 inch
- Write a review
$41.64
Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)1/2Connection diameter - inch (DCON MS)0.5Connection diameter - millimeter (DCON MS)12.7Cut lengthMediumCutting diameter - fractional inch (DC)1/2Cutting diameter - inch (DC)0.5Cutting diameter - millimeter (DC)12.7Cutting diameter tolerance class (TCDC)ANSI +.0000/-.0015Depth of cut maximum - fractional inch (APMX)13/16EDP number7647829Flute count (NOF)2Flute helix angle (FHA)30MaterialHSSMaterial applicationP - Steel and cast steelMID number7647829Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC6001/2Overall length - fractional inch (OAL)4.1/8Overall length - inch (OAL)4.125Overall length - millimeter (OAL)104.78Radial rake angle (GAMF)8ShankCylindrical shank
Specifications
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 1/2 |
| Connection diameter - inch (DCON MS) | 0.5 |
| Connection diameter - millimeter (DCON MS) | 12.7 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 1/2 |
| Cutting diameter - inch (DC) | 0.5 |
| Cutting diameter - millimeter (DC) | 12.7 |
| Cutting diameter tolerance class (TCDC) | ANSI +.0000/-.0015 |
| Depth of cut maximum - fractional inch (APMX) | 13/16 |
| EDP number | 7647829 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 7647829 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C6001/2 |
| Overall length - fractional inch (OAL) | 4.1/8 |
| Overall length - inch (OAL) | 4.125 |
| Overall length - millimeter (OAL) | 104.78 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank |
7647829
