Dormer E3821/4 6305850 G(BSP) Machine Tap Spiral Flute 40° Blue Shark 4FL 1/4 inch x 19
- Write a review
$65.37
Basic StandardDIN 5156Clamping Length - millimeter (LSC)12Clamping width - inch0.3543Clamping width - millimeter (WSC)13.16CoatingSteam TemperedConnection diameter - inch (DCON MS)11Connection diameter - millimeter (DCON MS)9EDP number46305850Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)40Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationM - Stainless steelMID number6305850Ordering code ANSIE3821/4Overall length - inch (OAL)3.937Overall length - millimeter (OAL)100Premachined hole diameter - inch (PHD)0.4646Premachined hole diameter - millimeter (PHD)40ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.5181Thread diameter - millimeter (TD)11.8Thread diameter size (TDZ)1/4Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)0.5906Threading length - millimeter (THL)15Threads per inch (TPI)19Usable length (ULDR)2
Specifications
| Basic Standard | DIN 5156 |
| Clamping Length - millimeter (LSC) | 12 |
| Clamping width - inch | 0.3543 |
| Clamping width - millimeter (WSC) | 13.16 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 11 |
| Connection diameter - millimeter (DCON MS) | 9 |
| EDP number | 46305850 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 40 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | M - Stainless steel |
| MID number | 6305850 |
| Ordering code ANSI | E3821/4 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 100 |
| Premachined hole diameter - inch (PHD) | 0.4646 |
| Premachined hole diameter - millimeter (PHD) | 40 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.5181 |
| Thread diameter - millimeter (TD) | 11.8 |
| Thread diameter size (TDZ) | 1/4 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 0.5906 |
| Threading length - millimeter (THL) | 15 |
| Threads per inch (TPI) | 19 |
| Usable length (ULDR) | 2 |
6305850