- New
Pramet 803D-58-174-S40 6758969 Indexable Drill 3 x D
- Write a review
$740.32
Adjustment limit maximum - millimeter (ADJLX)0.5Adjustment limit minimum - millimeter (ADJLN)0.15Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1.575Connection diameter - millimeter (DCON MS)40Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - inch (DC)2.283Cutting diameter - millimeter (DC)58Cutting edge count (CEDC)1Depth of cut maximum - inch (APMX)6.8504Depth of cut maximum - millimeter (APMX)174Flange diameter - millimeter (DF)58Overall length - inch (OAL)10.63Overall length - millimeter (OAL)270Protruding length - inch (LPR)7.874Protruding length - millimeter (LPR)200ShankCylindrical Shank ISO 9766Shank length - inch (LS)2.7559Shank length - millimeter (LS)70Usable length (ULDR)3Usable Length - inch (LU)7.3228Usable Length - millimeter (LU)186
Specifications
| Adjustment limit maximum - millimeter (ADJLX) | 0.5 |
| Adjustment limit minimum - millimeter (ADJLN) | 0.15 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1.575 |
| Connection diameter - millimeter (DCON MS) | 40 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 2.283 |
| Cutting diameter - millimeter (DC) | 58 |
| Cutting edge count (CEDC) | 1 |
| Depth of cut maximum - inch (APMX) | 6.8504 |
| Depth of cut maximum - millimeter (APMX) | 174 |
| Flange diameter - millimeter (DF) | 58 |
| Overall length - inch (OAL) | 10.63 |
| Overall length - millimeter (OAL) | 270 |
| Protruding length - inch (LPR) | 7.874 |
| Protruding length - millimeter (LPR) | 200 |
| Shank | Cylindrical Shank ISO 9766 |
| Shank length - inch (LS) | 2.7559 |
| Shank length - millimeter (LS) | 70 |
| Usable length (ULDR) | 3 |
| Usable Length - inch (LU) | 7.3228 |
| Usable Length - millimeter (LU) | 186 |
6758969
