Dormer E626M12 7350459 Machine Tap Red Shark for Alloy Steels Spiral Flute 3FL M12 x 1.75 mm
- Write a review
$67.11
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)11Clamping width - inch0.273CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.367Connection diameter - millimeter (DCON MS)9.32Coolant supply property (CSP)YEDP number7350459Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number7350459Ordering code ANSIE626M12Overall length - inch (OAL)4.3307Overall length - millimeter (OAL)0.367Premachined hole diameter - imperial (PHD)YPremachined hole diameter - inch (PHD)0.4055Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)10.3Thread diameter size (TDZ)12Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0689Thread pitch - millimeter (TP)1.75Threading length - inch (THL)0.7087Threading length - millimeter (THL)18Tolerance limitD6Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 11 |
| Clamping width - inch | 0.273 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.367 |
| Connection diameter - millimeter (DCON MS) | 9.32 |
| Coolant supply property (CSP) | Y |
| EDP number | 7350459 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 7350459 |
| Ordering code ANSI | E626M12 |
| Overall length - inch (OAL) | 4.3307 |
| Overall length - millimeter (OAL) | 0.367 |
| Premachined hole diameter - imperial (PHD) | Y |
| Premachined hole diameter - inch (PHD) | 0.4055 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 10.3 |
| Thread diameter size (TDZ) | 12 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0689 |
| Thread pitch - millimeter (TP) | 1.75 |
| Threading length - inch (THL) | 0.7087 |
| Threading length - millimeter (THL) | 18 |
| Tolerance limit | D6 |
| Usable length (ULDR) | 2.5 |
7350459