Pramet SDKT 1205AESN-FM:M6330 7601343 Milling Insert - Square Shoulder
- Write a review
$19.38
Coating0.014Coating process0.006Coating property (CTP)1Cooling effectFMCorner radius - inch (RE)M6330Corner radius - millimeter (RE)PVDCutting edge effective length - inch (LE)0.5Cutting edge effective length - millimeter (LE)12.7Cutting edge length - inch (L)0.5Cutting edge length - millimeter (L)12.7Depth of cut maximum - inch (APMX)0.394Depth of cut maximum - millimeter (APMX)10Feed maximal - millimeter0.35Feed minimal - millimeter0.15Feed_MAX_IMP_NUM0.008Feed_MIN_IMP_NUM0.2Fixing hole diameter - inch (D1)0.217Fixing hole diameter - millimeter (D1)5.5Insert cutting diameter - millimeter (CDI)5.56Wiper edge length - inch (BS)Slightly negative effect on tool life
Specifications
| Coating | 0.014 |
| Coating process | 0.006 |
| Coating property (CTP) | 1 |
| Cooling effect | FM |
| Corner radius - inch (RE) | M6330 |
| Corner radius - millimeter (RE) | PVD |
| Cutting edge effective length - inch (LE) | 0.5 |
| Cutting edge effective length - millimeter (LE) | 12.7 |
| Cutting edge length - inch (L) | 0.5 |
| Cutting edge length - millimeter (L) | 12.7 |
| Depth of cut maximum - inch (APMX) | 0.394 |
| Depth of cut maximum - millimeter (APMX) | 10 |
| Feed maximal - millimeter | 0.35 |
| Feed minimal - millimeter | 0.15 |
| Feed_MAX_IMP_NUM | 0.008 |
| Feed_MIN_IMP_NUM | 0.2 |
| Fixing hole diameter - inch (D1) | 0.217 |
| Fixing hole diameter - millimeter (D1) | 5.5 |
| Insert cutting diameter - millimeter (CDI) | 5.56 |
| Wiper edge length - inch (BS) | Slightly negative effect on tool life |
SDKT 1205AESN-FM:M6330
