Dormer EP303/8 5973841 UNF Machine Tap Spiral Point 3FL 3/8 inch x 24
- Write a review
$54.18
Basic StandardDIN 2184-1Clamping Length - millimeter (LSC)11Clamping width - fractional inch (WSC)8Clamping width - inch0.315CoatingBrightConnection diameter - inch (DCON MS)10Coolant supply property (CSP)9.525EDP number138403Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5973841Ordering code ANSIEP303/8Overall length - inch (OAL)3.937Overall length - millimeter (OAL)100Premachined hole diameter - inch (PHD)0.3346Premachined hole diameter - millimeter (PHD)8.5ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.375Thread diameter - millimeter (TD)9.525Thread diameter size (TDZ)3/8Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.7874Threading length - millimeter (THL)20Threads per inch (TPI)24Tolerance limitH4Usable length (ULDR)2.5Usable Length - inch (LU)1.5354Usable Length - millimeter (LU)39
Specifications
| Basic Standard | DIN 2184-1 |
| Clamping Length - millimeter (LSC) | 11 |
| Clamping width - fractional inch (WSC) | 8 |
| Clamping width - inch | 0.315 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 10 |
| Coolant supply property (CSP) | 9.525 |
| EDP number | 138403 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5973841 |
| Ordering code ANSI | EP303/8 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 100 |
| Premachined hole diameter - inch (PHD) | 0.3346 |
| Premachined hole diameter - millimeter (PHD) | 8.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.375 |
| Thread diameter - millimeter (TD) | 9.525 |
| Thread diameter size (TDZ) | 3/8 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.7874 |
| Threading length - millimeter (THL) | 20 |
| Threads per inch (TPI) | 24 |
| Tolerance limit | H4 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.5354 |
| Usable Length - millimeter (LU) | 39 |
5973841
