Dormer E001M1.6 5973804 Machine Tap Spiral Point 2FL M 1, 6-ISO2/6H 41/7/2, 5/2
- Write a review
$38.74
Basic StandardISO 529Clamping Length - millimeter (LSC)4Clamping width - fractional inch (WSC)2Clamping width - inch0.0787CoatingSteam TemperedConnection diameter - inch (DCON MS)2.5EDP number567814Flute count (NOF)2Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973817Ordering code ANSIE001M16Overall length - inch (OAL)1.6142Overall length - millimeter (OAL)41Premachined hole diameter - inch (PHD)0.0492Premachined hole diameter - millimeter (PHD)1.25ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)1.6Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0138Thread pitch - millimeter (TP)0.35Threading length - inch (THL)0.2756Threading length - millimeter (THL)7Tolerance limitD3Usable length (ULDR)2.5Usable Length - inch (LU)0.2756Usable Length - millimeter (LU)7
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 4 |
| Clamping width - fractional inch (WSC) | 2 |
| Clamping width - inch | 0.0787 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 2.5 |
| EDP number | 567814 |
| Flute count (NOF) | 2 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973817 |
| Ordering code ANSI | E001M16 |
| Overall length - inch (OAL) | 1.6142 |
| Overall length - millimeter (OAL) | 41 |
| Premachined hole diameter - inch (PHD) | 0.0492 |
| Premachined hole diameter - millimeter (PHD) | 1.25 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 1.6 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0138 |
| Thread pitch - millimeter (TP) | 0.35 |
| Threading length - inch (THL) | 0.2756 |
| Threading length - millimeter (THL) | 7 |
| Tolerance limit | D3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.2756 |
| Usable Length - millimeter (LU) | 7 |
5973804
