Pramet 25L2R080B25-SZP25-C 6761640 End Milling Cutter - Copy And Profile
- Write a review
$429.80
Axial rake angle (GAMP)-10Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.984Connection diameter - millimeter (DCON MS)25Connection size code machine side (CZC MS)-Coolant supply property (CSP)1Cutting diameter maximum - inch (DCX)0.984Cutting diameter maximum - millimeter (DCX)25Depth of cut maximum - millimeter (APMX)22.3Functional length - millimeter (LF)105Hand (Cutting direction)RightInsert group used in the toolZP 25Insert index count (NOI)2Maximum ramping angle (RMPX)22.3Not recomendedFinishing - very good surface qualityOverall length - inch (OAL)5.394Overall length - millimeter (OAL)137Peripheral effective cutting edge count (ZEFP)2Possible useRoughingRadial rake angle (GAMF)0Rotational speed maximum (RPMX)24000ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)80
Specifications
| Axial rake angle (GAMP) | -10 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.984 |
| Connection diameter - millimeter (DCON MS) | 25 |
| Connection size code machine side (CZC MS) | - |
| Coolant supply property (CSP) | 1 |
| Cutting diameter maximum - inch (DCX) | 0.984 |
| Cutting diameter maximum - millimeter (DCX) | 25 |
| Depth of cut maximum - millimeter (APMX) | 22.3 |
| Functional length - millimeter (LF) | 105 |
| Hand (Cutting direction) | Right |
| Insert group used in the tool | ZP 25 |
| Insert index count (NOI) | 2 |
| Maximum ramping angle (RMPX) | 22.3 |
| Not recomended | Finishing - very good surface quality |
| Overall length - inch (OAL) | 5.394 |
| Overall length - millimeter (OAL) | 137 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Possible use | Roughing |
| Radial rake angle (GAMF) | 0 |
| Rotational speed maximum (RPMX) | 24000 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 80 |
6761640
