Dormer E252M10 5975917 Machine Tap Straight Flute White Shark 4FL M10 x 1.50 mm
- Write a review
$27.44
Basic StandardDIN 376Clamping Length - millimeter (LSC)8Clamping width - fractional inch (WSC)5.5Clamping width - inch0.2165CoatingSteam TemperedConnection diameter - inch (DCON MS)0.2756Connection diameter - millimeter (DCON MS)7EDP number87268Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metalsMID number5975917Ordering code ANSIE252M10Overall length - inch (OAL)3.937Overall length - millimeter (OAL)100Premachined hole diameter - inch (PHD)0.3346Premachined hole diameter - millimeter (PHD)8.5ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter size (TDZ)10Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - inch (THL)0.7874Threading length - millimeter (THL)20Tolerance limitD6Usable length (ULDR)2
Specifications
| Basic Standard | DIN 376 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - fractional inch (WSC) | 5.5 |
| Clamping width - inch | 0.2165 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 0.2756 |
| Connection diameter - millimeter (DCON MS) | 7 |
| EDP number | 87268 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals |
| MID number | 5975917 |
| Ordering code ANSI | E252M10 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 100 |
| Premachined hole diameter - inch (PHD) | 0.3346 |
| Premachined hole diameter - millimeter (PHD) | 8.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - inch (THL) | 0.7874 |
| Threading length - millimeter (THL) | 20 |
| Tolerance limit | D6 |
| Usable length (ULDR) | 2 |
5975917
