Dormer E102M10NO8 5974814 M Hand Tap Straight Flute DIN 352 3FL M10 X 1.50 MM
- Write a review
$92.89
Basic StandardDIN 352Clamping width - inch0.2165Clamping width - millimeter (WSC)7CoatingSteam TemperedCoating property (CTP)3Connection diameter - inch (DCON MS)0.2756Connection diameter - millimeter (DCON MS)70Coolant supply property (CSP)5.5EDP number80061Flute count (NOF)8.5Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSS-EMaterial applicationK - Cast iron, M - Stainless steel, P - Steel and cast steelMID number5974814Ordering code ANSIE102M10NO8Overall length - inch (OAL)2.7559Overall length - millimeter (OAL)70Premachined hole diameter - inch (PHD)0.3346Premachined hole diameter - millimeter (PHD)8.5ShankCylindrical shank with SquareTap chamfer style (TCS)A 6 - 8 / B 3.5 - 5 / C 2 - 3Thread diameter size (TDZ)10Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - inch (THL)0.8661Threading length - millimeter (THL)22Usable length (ULDR)1.5
Specifications
| Basic Standard | DIN 352 |
| Clamping width - inch | 0.2165 |
| Clamping width - millimeter (WSC) | 7 |
| Coating | Steam Tempered |
| Coating property (CTP) | 3 |
| Connection diameter - inch (DCON MS) | 0.2756 |
| Connection diameter - millimeter (DCON MS) | 70 |
| Coolant supply property (CSP) | 5.5 |
| EDP number | 80061 |
| Flute count (NOF) | 8.5 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E |
| Material application | K - Cast iron, M - Stainless steel, P - Steel and cast steel |
| MID number | 5974814 |
| Ordering code ANSI | E102M10NO8 |
| Overall length - inch (OAL) | 2.7559 |
| Overall length - millimeter (OAL) | 70 |
| Premachined hole diameter - inch (PHD) | 0.3346 |
| Premachined hole diameter - millimeter (PHD) | 8.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | A 6 - 8 / B 3.5 - 5 / C 2 - 3 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - inch (THL) | 0.8661 |
| Threading length - millimeter (THL) | 22 |
| Usable length (ULDR) | 1.5 |
5974814