Dormer C1598.0 5984143 Slot Drill W 844 K 8.00 mm
- Write a review
$35.28
Basic StandardDIN 844 KCoatingBrightConnection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthShortCutting diameter - inch (DC)0.315Cutting diameter - millimeter (DC)8Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)0.748Depth of cut maximum - millimeter (APMX)19EDP number59630Flute count (NOF)2Flute helix angle (FHA)40MaterialHSS-EMaterial applicationN - Non-ferrous metalsMID number5984143Mill ProfileW - Non-ferrous Cutter Type for Soft Malleable MaterialsOrdering code ANSIC1598.0Overall length - inch (OAL)2.7165Overall length - millimeter (OAL)69Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)20ShankWeldon shank DIN 1835B
Specifications
| Basic Standard | DIN 844 K |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.315 |
| Cutting diameter - millimeter (DC) | 8 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 0.748 |
| Depth of cut maximum - millimeter (APMX) | 19 |
| EDP number | 59630 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 40 |
| Material | HSS-E |
| Material application | N - Non-ferrous metals |
| MID number | 5984143 |
| Mill Profile | W - Non-ferrous Cutter Type for Soft Malleable Materials |
| Ordering code ANSI | C1598.0 |
| Overall length - inch (OAL) | 2.7165 |
| Overall length - millimeter (OAL) | 69 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 20 |
| Shank | Weldon shank DIN 1835B |
5984143
