Dormer E5471.1/2NO2 5976722 G(BSP) Machine Tap Straight Flute 6FL 1.1/2 inch x 11
- Write a review
$431.92
Basic StandardISO 2284Clamping Length - millimeter (LSC)31Clamping width - fractional inch (WSC)28Clamping width - inch1.1024CoatingBrightConnection diameter - inch (DCON MS)1.3976Connection diameter - millimeter (DCON MS)35.5Coolant supply property (CSP)47.803EDP number99193Flute count (NOF)6Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976722Ordering code ANSIE5471.1/2NO2Overall length - inch (OAL)4.9213Overall length - millimeter (OAL)125Premachined hole diameter - inch (PHD)1.7717Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareThread diameter - inch (TD)1.882Thread diameter - millimeter (TD)47.803Thread diameter size (TDZ)1.1/2Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)1.4567Threading length - millimeter (THL)37Threads per inch (TPI)11Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 2284 |
| Clamping Length - millimeter (LSC) | 31 |
| Clamping width - fractional inch (WSC) | 28 |
| Clamping width - inch | 1.1024 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 1.3976 |
| Connection diameter - millimeter (DCON MS) | 35.5 |
| Coolant supply property (CSP) | 47.803 |
| EDP number | 99193 |
| Flute count (NOF) | 6 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976722 |
| Ordering code ANSI | E5471.1/2NO2 |
| Overall length - inch (OAL) | 4.9213 |
| Overall length - millimeter (OAL) | 125 |
| Premachined hole diameter - inch (PHD) | 1.7717 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Thread diameter - inch (TD) | 1.882 |
| Thread diameter - millimeter (TD) | 47.803 |
| Thread diameter size (TDZ) | 1.1/2 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 1.4567 |
| Threading length - millimeter (THL) | 37 |
| Threads per inch (TPI) | 11 |
| Usable length (ULDR) | 1.5 |
5976722
