Dormer E000TINM10 6196690 Machine Tap Spiral Point 3FL M10 x 1.50 mm
- Write a review
$34.54
Basic StandardISO 529Clamping Length - millimeter (LSC)11Clamping width - fractional inch (WSC)8Clamping width - inch0.315CoatingTiNCoating property (CTP)1Connection diameter - inch (DCON MS)10EDP number46196690Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number6196690Ordering code ANSIE000TINM10Overall length - inch (OAL)3.1496Overall length - millimeter (OAL)80Premachined hole diameter - inch (PHD)0.3346Premachined hole diameter - millimeter (PHD)8.5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)10Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - inch (THL)0.7087Threading length - millimeter (THL)18Tolerance limitD6Usable length (ULDR)2.5Usable Length - inch (LU)1.3386Usable Length - millimeter (LU)34
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 11 |
| Clamping width - fractional inch (WSC) | 8 |
| Clamping width - inch | 0.315 |
| Coating | TiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 10 |
| EDP number | 46196690 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 6196690 |
| Ordering code ANSI | E000TINM10 |
| Overall length - inch (OAL) | 3.1496 |
| Overall length - millimeter (OAL) | 80 |
| Premachined hole diameter - inch (PHD) | 0.3346 |
| Premachined hole diameter - millimeter (PHD) | 8.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - inch (THL) | 0.7087 |
| Threading length - millimeter (THL) | 18 |
| Tolerance limit | D6 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.3386 |
| Usable Length - millimeter (LU) | 34 |
6196690
