Dormer C1109.5 5984017 Slot Drill 9.50 mm
- Write a review
$36.23
Basic StandardDIN 327 DCoatingBrightConnection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthExtra shortCutting diameter - inch (DC)0.374Cutting diameter - millimeter (DC)9.5Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)0.4331Depth of cut maximum - millimeter (APMX)11EDP number353554Flute count (NOF)2Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5984017Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC1109.5Overall length - inch (OAL)2.4016Overall length - millimeter (OAL)61Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)12ShankWeldon shank DIN 1835B
Specifications
| Basic Standard | DIN 327 D |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.374 |
| Cutting diameter - millimeter (DC) | 9.5 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 0.4331 |
| Depth of cut maximum - millimeter (APMX) | 11 |
| EDP number | 353554 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5984017 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C1109.5 |
| Overall length - inch (OAL) | 2.4016 |
| Overall length - millimeter (OAL) | 61 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
5984017
