Dormer E501M8NO2 5976775 Machine Tap Straight Flute 3FL M8 x 1.25 mm
- Write a review
$27.79
Basic StandardISO 529Clamping Length - millimeter (LSC)9Clamping width - fractional inch (WSC)6.3Clamping width - inch0.248CoatingBrightConnection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8EDP number95133Flute count (NOF)3Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)LeftMaterialHSSMaterial applicationP - Steel and cast steelMID number5976775Ordering code ANSIE501M8NO2Overall length - inch (OAL)2.8346Overall length - millimeter (OAL)72Premachined hole diameter - inch (PHD)0.2677Premachined hole diameter - millimeter (PHD)6.8ShankCylindrical shank with SquareThread diameter size (TDZ)8Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0492Thread pitch - millimeter (TP)1.25Threading length - inch (THL)0.6299Threading length - millimeter (THL)16Tolerance limitD5Usable length (ULDR)1.5Usable Length - inch (LU)1.1417Usable Length - millimeter (LU)29
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 9 |
| Clamping width - fractional inch (WSC) | 6.3 |
| Clamping width - inch | 0.248 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| EDP number | 95133 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Left |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976775 |
| Ordering code ANSI | E501M8NO2 |
| Overall length - inch (OAL) | 2.8346 |
| Overall length - millimeter (OAL) | 72 |
| Premachined hole diameter - inch (PHD) | 0.2677 |
| Premachined hole diameter - millimeter (PHD) | 6.8 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 8 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0492 |
| Thread pitch - millimeter (TP) | 1.25 |
| Threading length - inch (THL) | 0.6299 |
| Threading length - millimeter (THL) | 16 |
| Tolerance limit | D5 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 1.1417 |
| Usable Length - millimeter (LU) | 29 |
5976775
