Pramet 125N3R177C100-ISOD05-C 7546855 End Milling Cutter - Face
- Write a review
$394.84
Axial rake angle (GAMP)-10Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1Connection diameter - millimeter (DCON MS)25.4Coolant supply property (CSP)1Cutting diameter - inch (DC)0.961Cutting diameter - millimeter (DC)24.4Cutting diameter maximum - inch (DCX)1.25Cutting diameter maximum - millimeter (DCX)31.8Hand (Cutting direction)RightOverall length - inch (OAL)5Overall length - millimeter (OAL)127Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)8Rotational speed maximum (RPMX)17000ShankCylindrical shank DIN 1835ATool cutting edge angle (KAPR)45Usable Length - inch (LU)1.772
Specifications
| Axial rake angle (GAMP) | -10 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1 |
| Connection diameter - millimeter (DCON MS) | 25.4 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.961 |
| Cutting diameter - millimeter (DC) | 24.4 |
| Cutting diameter maximum - inch (DCX) | 1.25 |
| Cutting diameter maximum - millimeter (DCX) | 31.8 |
| Hand (Cutting direction) | Right |
| Overall length - inch (OAL) | 5 |
| Overall length - millimeter (OAL) | 127 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 8 |
| Rotational speed maximum (RPMX) | 17000 |
| Shank | Cylindrical shank DIN 1835A |
| Tool cutting edge angle (KAPR) | 45 |
| Usable Length - inch (LU) | 1.772 |
7546855
