Dormer R4535/8 5978955 140° Coolant Drill 5/8 inch
- Write a review
$519.00
ApplicationAngleIcon_DICT_SELDrill point 140°Basic StandardDIN 6537 LCoatingTiAlNCoating processPVDCoating property (CTP)1Connection (shank) descriptionCylindrical shank DIN 6535 HAConnection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - fractional inch (DC)5/8Cutting diameter - inch (DC)0.625Cutting diameter - millimeter (DC)15.88Cutting diameter tolerance class (TCDC)m7Drill LengthJobberEDP number623947Hand (Cutting direction)RightLength chip flute - inch (LCF)3.2283Length chip flute - millimeter (LCF)82MaterialHMMID number5978955Ordering code ANSIR4535/8Overall length - inch (OAL)5.2362Overall length - millimeter (OAL)133Point Angle (SIG)140Shank length - millimeter (LS)48Spiral formCTWUsable length (ULDR)5
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 140° |
| Basic Standard | DIN 6537 L |
| Coating | TiAlN |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Connection (shank) description | Cylindrical shank DIN 6535 HA |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - fractional inch (DC) | 5/8 |
| Cutting diameter - inch (DC) | 0.625 |
| Cutting diameter - millimeter (DC) | 15.88 |
| Cutting diameter tolerance class (TCDC) | m7 |
| Drill Length | Jobber |
| EDP number | 623947 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 3.2283 |
| Length chip flute - millimeter (LCF) | 82 |
| Material | HM |
| MID number | 5978955 |
| Ordering code ANSI | R4535/8 |
| Overall length - inch (OAL) | 5.2362 |
| Overall length - millimeter (OAL) | 133 |
| Point Angle (SIG) | 140 |
| Shank length - millimeter (LS) | 48 |
| Spiral form | CTW |
| Usable length (ULDR) | 5 |
5978955
