Dormer C60113/16X5/8 7647847 End Mill ANSI 13/16 inch
- Write a review
$52.67
Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)5/8Connection diameter - inch (DCON MS)0.625Connection diameter - millimeter (DCON MS)15.88Cut lengthMediumCutting diameter - fractional inch (DC)13/16Cutting diameter - inch (DC)0.8125Cutting diameter - millimeter (DC)20.64Cutting diameter tolerance class (TCDC)ANSI +.003/-.000Depth of cut maximum - fractional inch (APMX)1.1/2EDP number7647847Flute count (NOF)2Flute helix angle (FHA)30MaterialHSSMaterial applicationP - Steel and cast steelMID number7647847Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC60113/16X5/8Overall length - fractional inch (OAL)4"Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)8ShankCylindrical shank
Specifications
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 5/8 |
| Connection diameter - inch (DCON MS) | 0.625 |
| Connection diameter - millimeter (DCON MS) | 15.88 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 13/16 |
| Cutting diameter - inch (DC) | 0.8125 |
| Cutting diameter - millimeter (DC) | 20.64 |
| Cutting diameter tolerance class (TCDC) | ANSI +.003/-.000 |
| Depth of cut maximum - fractional inch (APMX) | 1.1/2 |
| EDP number | 7647847 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 7647847 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C60113/16X5/8 |
| Overall length - fractional inch (OAL) | 4" |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank |
7647847
