Pramet 12L2R045A20-SZP12 6761621 End Milling Cutter - Copy And Profile
- Write a review
$323.89
Axial rake angle (GAMP)-10Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.787Connection diameter - millimeter (DCON MS)20Connection size code machine side (CZC MS)-Cutting diameter maximum - inch (DCX)0.472Cutting diameter maximum - millimeter (DCX)12Depth of cut maximum - millimeter (APMX)10.7Hand (Cutting direction)RightInsert group used in the toolZP 12Insert index count (NOI)2Maximum ramping angle (RMPX)10.7Not recomendedFinishing - very good surface qualityOverall length - inch (OAL)7.874Overall length - millimeter (OAL)200Peripheral effective cutting edge count (ZEFP)2Possible useMedium machiningRadial rake angle (GAMF)0Rotational speed maximum (RPMX)21000ShankCylindrical shank DIN 1835AUsable Length maximum - millimeter (LUX)22
Specifications
| Axial rake angle (GAMP) | -10 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.787 |
| Connection diameter - millimeter (DCON MS) | 20 |
| Connection size code machine side (CZC MS) | - |
| Cutting diameter maximum - inch (DCX) | 0.472 |
| Cutting diameter maximum - millimeter (DCX) | 12 |
| Depth of cut maximum - millimeter (APMX) | 10.7 |
| Hand (Cutting direction) | Right |
| Insert group used in the tool | ZP 12 |
| Insert index count (NOI) | 2 |
| Maximum ramping angle (RMPX) | 10.7 |
| Not recomended | Finishing - very good surface quality |
| Overall length - inch (OAL) | 7.874 |
| Overall length - millimeter (OAL) | 200 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Possible use | Medium machining |
| Radial rake angle (GAMF) | 0 |
| Rotational speed maximum (RPMX) | 21000 |
| Shank | Cylindrical shank DIN 1835A |
| Usable Length maximum - millimeter (LUX) | 22 |
6761621
