Dormer S52312.0XR0.5 6706751 Corner Radius End Mill 12.00 mm x 0.5 mm
- Write a review
$174.50
Basic StandardDORMERCoatingTiSiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.4724Connection diameter - millimeter (DCON MS)12Corner radius - inch (RE)0.0197Corner radius - millimeter (RE)0.5Cut lengthShortCutting diameter - inch (DC)0.4724Cutting diameter - millimeter (DC)12Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.9843Depth of cut maximum - millimeter (APMX)25EDP number46706751Flute count (NOF)4Flute helix angle (FHA)40MaterialHMMaterial applicationH - Hardened materialsMID number6706751Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS52312.0XR0.5Overall length - inch (OAL)2.9528Overall length - millimeter (OAL)75Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)-6ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | TiSiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.4724 |
| Connection diameter - millimeter (DCON MS) | 12 |
| Corner radius - inch (RE) | 0.0197 |
| Corner radius - millimeter (RE) | 0.5 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.4724 |
| Cutting diameter - millimeter (DC) | 12 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.9843 |
| Depth of cut maximum - millimeter (APMX) | 25 |
| EDP number | 46706751 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 40 |
| Material | HM |
| Material application | H - Hardened materials |
| MID number | 6706751 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S52312.0XR0.5 |
| Overall length - inch (OAL) | 2.9528 |
| Overall length - millimeter (OAL) | 75 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | -6 |
| Shank | Cylindrical shank DIN 6535 HA |
6706751
