Dormer A7771/8 5971015 Jobber Drill Split Point DIN 338 1/8 inch
- Write a review
$5.34
ApplicationAngleIcon_DICT_SELDrill point 135°Basic StandardDIN 338CoatingBronzeConnection (shank) descriptionCylindrical shankConnection diameter - inch (DCON MS)0.1252Connection diameter - millimeter (DCON MS)3.18Cutting diameter - fractional inch (DC)1/8Cutting diameter - inch (DC)0.125Cutting diameter - millimeter (DC)3.18Cutting diameter tolerance class (TCDC)h8Drill LengthJobberEDP number374535Hand (Cutting direction)RightLength chip flute - inch (LCF)1.4173Length chip flute - millimeter (LCF)36MaterialHSS-EMaterial applicationK - Cast iron, P - Steel and cast steel, S - High-temperature alloysMID number5971015Ordering code ANSIA7771/8Overall length - inch (OAL)2.5591Overall length - millimeter (OAL)65Point Angle (SIG)135Spiral formStandard SpiralSurface treatementSteam TemperedUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 135° |
| Basic Standard | DIN 338 |
| Coating | Bronze |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - inch (DCON MS) | 0.1252 |
| Connection diameter - millimeter (DCON MS) | 3.18 |
| Cutting diameter - fractional inch (DC) | 1/8 |
| Cutting diameter - inch (DC) | 0.125 |
| Cutting diameter - millimeter (DC) | 3.18 |
| Cutting diameter tolerance class (TCDC) | h8 |
| Drill Length | Jobber |
| EDP number | 374535 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 1.4173 |
| Length chip flute - millimeter (LCF) | 36 |
| Material | HSS-E |
| Material application | K - Cast iron, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5971015 |
| Ordering code ANSI | A7771/8 |
| Overall length - inch (OAL) | 2.5591 |
| Overall length - millimeter (OAL) | 65 |
| Point Angle (SIG) | 135 |
| Spiral form | Standard Spiral |
| Surface treatement | Steam Tempered |
| Usable length (ULDR) | 4 |
5971015
