Dormer C80021.0X12.0 5985504 T-slot Cutter 21.00 mm x 12.0 mm
- Write a review
$209.32
Basic StandardDIN 851CoatingBrightConnection diameter - inch (DCON MS)0.4724Connection diameter - millimeter (DCON MS)12Cutting diameter - inch (DC)0.8268Cutting diameter - millimeter (DC)21Cutting diameter tolerance class (TCDC)d11Cutting width - inch (CW)0.3543Cutting width - millimeter (CW)9Depth of cut maximum - inch (APMX)0.3543Depth of cut maximum - millimeter (APMX)9EDP number74473Flute count (NOF)8Flute helix angle (FHA)15Head length - millimeter (LH)27MaterialHSS-EMID number5985504Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.3937Neck diameter - millimeter (DN)10Ordering code ANSIC80021.0X12.0Overall length - inch (OAL)2.9134Overall length - millimeter (OAL)74Peripheral effective cutting edge count (ZEFP)8Radial rake angle (GAMF)10ShankCylindrical shank DIN 1835 B / D
Specifications
| Basic Standard | DIN 851 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.4724 |
| Connection diameter - millimeter (DCON MS) | 12 |
| Cutting diameter - inch (DC) | 0.8268 |
| Cutting diameter - millimeter (DC) | 21 |
| Cutting diameter tolerance class (TCDC) | d11 |
| Cutting width - inch (CW) | 0.3543 |
| Cutting width - millimeter (CW) | 9 |
| Depth of cut maximum - inch (APMX) | 0.3543 |
| Depth of cut maximum - millimeter (APMX) | 9 |
| EDP number | 74473 |
| Flute count (NOF) | 8 |
| Flute helix angle (FHA) | 15 |
| Head length - millimeter (LH) | 27 |
| Material | HSS-E |
| MID number | 5985504 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.3937 |
| Neck diameter - millimeter (DN) | 10 |
| Ordering code ANSI | C80021.0X12.0 |
| Overall length - inch (OAL) | 2.9134 |
| Overall length - millimeter (OAL) | 74 |
| Peripheral effective cutting edge count (ZEFP) | 8 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank DIN 1835 B / D |
5985504