Dormer S223HB1XR.030 7648717 Corner Radius End Mill 1 inch
- Write a review
$468.89
Basic StandardDORMERCoatingAlTiNCoating property (CTP)1Connection diameter - fractional inch (DCON MS)1"Connection diameter - inch (DCON MS)1Connection diameter - millimeter (DCON MS)25.4Corner radius - inch (RE)0.03Cut lengthMediumCutting diameter - fractional inch (DC)1"Cutting diameter - inch (DC)1Cutting diameter - millimeter (DC)25.4Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)2.1/4EDP number7648717Flute count (NOF)4Flute helix unequal1MaterialHMMID number7648717Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS223HB1XR.030Overall length - fractional inch (OAL)5"Overall length - inch (OAL)5Overall length - millimeter (OAL)127Radial rake angle (GAMF)8ShankCylindrical shank DIN 6535 HB
Specifications
| Basic Standard | DORMER |
| Coating | AlTiN |
| Coating property (CTP) | 1 |
| Connection diameter - fractional inch (DCON MS) | 1" |
| Connection diameter - inch (DCON MS) | 1 |
| Connection diameter - millimeter (DCON MS) | 25.4 |
| Corner radius - inch (RE) | 0.03 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 1" |
| Cutting diameter - inch (DC) | 1 |
| Cutting diameter - millimeter (DC) | 25.4 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 2.1/4 |
| EDP number | 7648717 |
| Flute count (NOF) | 4 |
| Flute helix unequal | 1 |
| Material | HM |
| MID number | 7648717 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S223HB1XR.030 |
| Overall length - fractional inch (OAL) | 5" |
| Overall length - inch (OAL) | 5 |
| Overall length - millimeter (OAL) | 127 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank DIN 6535 HB |
7648717
