Pramet HZ/2 16-16 P9:333TN 6755956 Broaching Insert
- Write a review
$190.59
ChipbreakerNo chipbreakerCoating333TNCoating processPVDCoating property (CTP)1Cooling effectVery positive effect on tool life - cooling is recommendedCutting width - inch (CW)0.63Cutting width - millimeter (CW)16Cutting width lower tolerance - inch (CWTOLL)-0.002Cutting width lower tolerance - millimeter (CWTOLL)-0.061Cutting width upper tolerance - inch (CWTOLU)-0.001Cutting width upper tolerance - millimeter (CWTOLU)-0.018Depth of cut maximum - inch (APMX)0.354Depth of cut maximum - millimeter (APMX)9Feed maximal - millimeter0.35Feed minimal - millimeter0.09Feed_MAX_IMP_NUM0.014Feed_MIN_IMP_NUM0.004Insert length - inch (INSL)1.417Insert length - millimeter (INSL)36Insert shape code (SC)H - hexagonalInsert thickness - inch (S)0.547Insert thickness - millimeter (S)13.9Insert thickness total - inch (S1)0.551Insert thickness total - millimeter (S1)14
Specifications
| Chipbreaker | No chipbreaker |
| Coating | 333TN |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very positive effect on tool life - cooling is recommended |
| Cutting width - inch (CW) | 0.63 |
| Cutting width - millimeter (CW) | 16 |
| Cutting width lower tolerance - inch (CWTOLL) | -0.002 |
| Cutting width lower tolerance - millimeter (CWTOLL) | -0.061 |
| Cutting width upper tolerance - inch (CWTOLU) | -0.001 |
| Cutting width upper tolerance - millimeter (CWTOLU) | -0.018 |
| Depth of cut maximum - inch (APMX) | 0.354 |
| Depth of cut maximum - millimeter (APMX) | 9 |
| Feed maximal - millimeter | 0.35 |
| Feed minimal - millimeter | 0.09 |
| Feed_MAX_IMP_NUM | 0.014 |
| Feed_MIN_IMP_NUM | 0.004 |
| Insert length - inch (INSL) | 1.417 |
| Insert length - millimeter (INSL) | 36 |
| Insert shape code (SC) | H - hexagonal |
| Insert thickness - inch (S) | 0.547 |
| Insert thickness - millimeter (S) | 13.9 |
| Insert thickness total - inch (S1) | 0.551 |
| Insert thickness total - millimeter (S1) | 14 |
6755956
