Dormer S6291.5 8030277 Ball-Nosed End Mill
- Write a review
$41.83
Basic StandardDORMERCoatingBrightConnection diameter - inch (DCON MS)0.1575Connection diameter - millimeter (DCON MS)4Coolant supply property (CSP)0Corner radius - inch (RE)0.0295Corner radius - millimeter (RE)0.75Cut lengthExtra shortCutting diameter - inch (DC)0.0591Cutting diameter - millimeter (DC)1.5Cutting diameter tolerance class (TCDC)h9Cutting pitch differential (CPDF)0Depth of cut maximum - inch (APMX)0.0472Depth of cut maximum - millimeter (APMX)1.2EDP number8030277Flute count (NOF)2Flute helix angle (FHA)30Flute helix unequal0MaterialHMMaterial applicationN - Non-ferrous metalsMID number8030277Mill ProfileW - Non-ferrous Cutter Type for Soft Malleable MaterialsNeck diameter - inch (DN)0.0551Neck diameter - millimeter (DN)1.4Ordering code ANSIS6291.5Overall length - inch (OAL)1.9685Overall length - millimeter (OAL)50Radial rake angle (GAMF)11ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)12
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.1575 |
| Connection diameter - millimeter (DCON MS) | 4 |
| Coolant supply property (CSP) | 0 |
| Corner radius - inch (RE) | 0.0295 |
| Corner radius - millimeter (RE) | 0.75 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.0591 |
| Cutting diameter - millimeter (DC) | 1.5 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Cutting pitch differential (CPDF) | 0 |
| Depth of cut maximum - inch (APMX) | 0.0472 |
| Depth of cut maximum - millimeter (APMX) | 1.2 |
| EDP number | 8030277 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Flute helix unequal | 0 |
| Material | HM |
| Material application | N - Non-ferrous metals |
| MID number | 8030277 |
| Mill Profile | W - Non-ferrous Cutter Type for Soft Malleable Materials |
| Neck diameter - inch (DN) | 0.0551 |
| Neck diameter - millimeter (DN) | 1.4 |
| Ordering code ANSI | S6291.5 |
| Overall length - inch (OAL) | 1.9685 |
| Overall length - millimeter (OAL) | 50 |
| Radial rake angle (GAMF) | 11 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 12 |
8030277
