Dormer S90320.0 5983091 End Mill 20.00 mm
- Write a review
$206.04
Basic StandardDORMERCoatingBrightConnection diameter - inch (DCON MS)0.7874Connection diameter - millimeter (DCON MS)20Corner chamfer width - millimeter (CHW)0.3Cut lengthMediumCutting diameter - inch (DC)0.7874Cutting diameter - millimeter (DC)20Cutting diameter tolerance class (TCDC)h10Depth of cut maximum - inch (APMX)1.4961Depth of cut maximum - millimeter (APMX)38EDP number133002Flute count (NOF)3Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983091Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS90320.0Overall length - inch (OAL)4.0945Overall length - millimeter (OAL)104Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)12ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.7874 |
| Connection diameter - millimeter (DCON MS) | 20 |
| Corner chamfer width - millimeter (CHW) | 0.3 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.7874 |
| Cutting diameter - millimeter (DC) | 20 |
| Cutting diameter tolerance class (TCDC) | h10 |
| Depth of cut maximum - inch (APMX) | 1.4961 |
| Depth of cut maximum - millimeter (APMX) | 38 |
| EDP number | 133002 |
| Flute count (NOF) | 3 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983091 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S90320.0 |
| Overall length - inch (OAL) | 4.0945 |
| Overall length - millimeter (OAL) | 104 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 12 |
| Shank | Cylindrical shank DIN 6535 HA |
5983091
