Pramet SDMT 120508PR-R:M9325 6754561 Milling Insert - Square Shoulder
- Write a review
$15.78
Coating0.013Coating process0.008Coating property (CTP)1Cooling effectRCorner radius - inch (RE)M9325Corner radius - millimeter (RE)MT-CVDCutting edge effective length - inch (LE)0.5Cutting edge effective length - millimeter (LE)12.7Cutting edge length - inch (L)0.5Cutting edge length - millimeter (L)12.7Depth of cut maximum - inch (APMX)0.394Depth of cut maximum - millimeter (APMX)10Feed maximal - millimeter0.34Feed minimal - millimeter0.2Feed_MAX_IMP_NUM0.039Feed_MIN_IMP_NUM1Fixing hole diameter - inch (D1)0.173Fixing hole diameter - millimeter (D1)4.4Inscribed circle diameter - inch (IC)0.5Inscribed circle diameter - millimeter (IC)12.7Insert cutting diameter - millimeter (CDI)5Insert shape code (SC)S - squareInsert thickness - inch (S)0.8Insert thickness - millimeter (S)5Major cutting edge angle (KRINS)0.031Wiper edge length - inch (BS)Very negative effect on tool life - cooling is not recommended
Specifications
| Coating | 0.013 |
| Coating process | 0.008 |
| Coating property (CTP) | 1 |
| Cooling effect | R |
| Corner radius - inch (RE) | M9325 |
| Corner radius - millimeter (RE) | MT-CVD |
| Cutting edge effective length - inch (LE) | 0.5 |
| Cutting edge effective length - millimeter (LE) | 12.7 |
| Cutting edge length - inch (L) | 0.5 |
| Cutting edge length - millimeter (L) | 12.7 |
| Depth of cut maximum - inch (APMX) | 0.394 |
| Depth of cut maximum - millimeter (APMX) | 10 |
| Feed maximal - millimeter | 0.34 |
| Feed minimal - millimeter | 0.2 |
| Feed_MAX_IMP_NUM | 0.039 |
| Feed_MIN_IMP_NUM | 1 |
| Fixing hole diameter - inch (D1) | 0.173 |
| Fixing hole diameter - millimeter (D1) | 4.4 |
| Inscribed circle diameter - inch (IC) | 0.5 |
| Inscribed circle diameter - millimeter (IC) | 12.7 |
| Insert cutting diameter - millimeter (CDI) | 5 |
| Insert shape code (SC) | S - square |
| Insert thickness - inch (S) | 0.8 |
| Insert thickness - millimeter (S) | 5 |
| Major cutting edge angle (KRINS) | 0.031 |
| Wiper edge length - inch (BS) | Very negative effect on tool life - cooling is not recommended |
6754561
