Dormer S814HA10.0 5983564 End Mill N 6527 L 10.00 mm
- Write a review
$88.72
Basic StandardDIN 6527 LCoatingAlCrNCoating property (CTP)1Connection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Corner chamfer width - millimeter (CHW)0.2Cut lengthShortCutting diameter - inch (DC)0.3937Cutting diameter - millimeter (DC)10Cutting diameter tolerance class (TCDC)h10Depth of cut maximum - inch (APMX)0.8661Depth of cut maximum - millimeter (APMX)22EDP number642566Flute count (NOF)4Flute helix angle (FHA)34MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5983564Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS814HA10.0Overall length - inch (OAL)2.8346Overall length - millimeter (OAL)72Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)9ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DIN 6527 L |
| Coating | AlCrN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Corner chamfer width - millimeter (CHW) | 0.2 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.3937 |
| Cutting diameter - millimeter (DC) | 10 |
| Cutting diameter tolerance class (TCDC) | h10 |
| Depth of cut maximum - inch (APMX) | 0.8661 |
| Depth of cut maximum - millimeter (APMX) | 22 |
| EDP number | 642566 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 34 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5983564 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S814HA10.0 |
| Overall length - inch (OAL) | 2.8346 |
| Overall length - millimeter (OAL) | 72 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 9 |
| Shank | Cylindrical shank DIN 6535 HA |
5983564
