Dormer S722HB10.0 8030356 End Mill
- Write a review
$112.81
Basic StandardDORMERCoatingAlCrNConnection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Corner radius - inch (RE)0.0079Corner radius - millimeter (RE)0.2Cut lengthMediumCutting diameter - inch (DC)0.3937Cutting diameter - millimeter (DC)10Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)1.063Depth of cut maximum - millimeter (APMX)27EDP number8030356Flute count (NOF)4Flute helix angle (FHA)40Material applicationK - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloysMaterial code (BMC)HMMID number8030356Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.3622Neck diameter - millimeter (DN)9.2Ordering code ANSIS722HB10.0Overall length - inch (OAL)2.7559Overall length - millimeter (OAL)70Radial rake angle (GAMF)7ShankCylindrical shank DIN 6535 HBUsable Length - millimeter (LU)32
Specifications
| Basic Standard | DORMER |
| Coating | AlCrN |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Corner radius - inch (RE) | 0.0079 |
| Corner radius - millimeter (RE) | 0.2 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.3937 |
| Cutting diameter - millimeter (DC) | 10 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 1.063 |
| Depth of cut maximum - millimeter (APMX) | 27 |
| EDP number | 8030356 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 40 |
| Material application | K - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloys |
| Material code (BMC) | HM |
| MID number | 8030356 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.3622 |
| Neck diameter - millimeter (DN) | 9.2 |
| Ordering code ANSI | S722HB10.0 |
| Overall length - inch (OAL) | 2.7559 |
| Overall length - millimeter (OAL) | 70 |
| Radial rake angle (GAMF) | 7 |
| Shank | Cylindrical shank DIN 6535 HB |
| Usable Length - millimeter (LU) | 32 |
8030356
