Dormer E650M3 5978325 Combi Taps Spiral Flute 30° 2FL M3 x 0.50 mm
- Write a review
$14.81
Basic StandardDORMER-ISOClamping Length - millimeter (LSC)5Clamping width - inch0.0984Clamping width - millimeter (WSC)3.15CoatingSteam TemperedCoating property (CTP)2Connection diameter - inch (DCON MS)0.124Connection diameter - millimeter (DCON MS)56Coolant supply property (CSP)2.5EDP number167861Flute count (NOF)30Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)30Hand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5978325Ordering code ANSIE650M3Overall length - inch (OAL)2.2047Overall length - millimeter (OAL)56Premachined hole diameter - millimeter (PHD)2.5ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.0984Thread diameter - millimeter (TD)2.5Thread diameter size (TDZ)3Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0197Thread pitch - millimeter (TP)0.5Threading length - inch (THL)0.3937Threading length - millimeter (THL)10Usable length (ULDR)1.5
Specifications
| Basic Standard | DORMER-ISO |
| Clamping Length - millimeter (LSC) | 5 |
| Clamping width - inch | 0.0984 |
| Clamping width - millimeter (WSC) | 3.15 |
| Coating | Steam Tempered |
| Coating property (CTP) | 2 |
| Connection diameter - inch (DCON MS) | 0.124 |
| Connection diameter - millimeter (DCON MS) | 56 |
| Coolant supply property (CSP) | 2.5 |
| EDP number | 167861 |
| Flute count (NOF) | 30 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 30 |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5978325 |
| Ordering code ANSI | E650M3 |
| Overall length - inch (OAL) | 2.2047 |
| Overall length - millimeter (OAL) | 56 |
| Premachined hole diameter - millimeter (PHD) | 2.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.0984 |
| Thread diameter - millimeter (TD) | 2.5 |
| Thread diameter size (TDZ) | 3 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0197 |
| Thread pitch - millimeter (TP) | 0.5 |
| Threading length - inch (THL) | 0.3937 |
| Threading length - millimeter (THL) | 10 |
| Usable length (ULDR) | 1.5 |
5978325
