Dormer E0611NO3 5974255 Hand Tap Straight Flute UNC 1 inch x 8
- Write a review
$72.08
Basic StandardANSIClamping width - inch0.6CoatingBrightConnection diameter - inch (DCON MS)0.8Connection diameter - millimeter (DCON MS)20.32EDP number348819Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5974255Ordering code ANSIE0611NO3Overall length - fractional inch (OAL)5.1/8Overall length - inch (OAL)5.125Overall length - millimeter (OAL)130.18Premachined hole diameter - imperial (PHD)7/8Premachined hole diameter - inch (PHD)0.876Premachined hole diameter - millimeter (PHD)22.25ShankCylindrical shank with SquareThread diameter - millimeter (TD)7/8Thread diameter size (TDZ)1"Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)1.4173Threads per inch (TPI)8Tolerance limitH4Usable length (ULDR)1.5
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.6 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.8 |
| Connection diameter - millimeter (DCON MS) | 20.32 |
| EDP number | 348819 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5974255 |
| Ordering code ANSI | E0611NO3 |
| Overall length - fractional inch (OAL) | 5.1/8 |
| Overall length - inch (OAL) | 5.125 |
| Overall length - millimeter (OAL) | 130.18 |
| Premachined hole diameter - imperial (PHD) | 7/8 |
| Premachined hole diameter - inch (PHD) | 0.876 |
| Premachined hole diameter - millimeter (PHD) | 22.25 |
| Shank | Cylindrical shank with Square |
| Thread diameter - millimeter (TD) | 7/8 |
| Thread diameter size (TDZ) | 1" |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 1.4173 |
| Threads per inch (TPI) | 8 |
| Tolerance limit | H4 |
| Usable length (ULDR) | 1.5 |
5974255
